{"host": "cloudelastic1010.eqiad.wmnet", "state": "core_diff", "description": "Differences to core resources", "diff": {"full": {"total": 3881, "only_in_self": [], "only_in_other": [], "resource_diffs": [{"resource": "File[/etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9700\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}, {"resource": "File[/etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9300\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}, {"resource": "File[/etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9500\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}], "perc_changed": "0.08%"}, "core": {"total": 3881, "only_in_self": [], "only_in_other": [], "resource_diffs": [{"resource": "File[/etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9700\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}, {"resource": "File[/etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9300\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}, {"resource": "File[/etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9500\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}], "perc_changed": "0.08%"}, "main": {"total": 3881, "only_in_self": [], "only_in_other": [], "resource_diffs": [{"resource": "File[/etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-psi-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9700\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}, {"resource": "File[/etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-chi-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9300\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}, {"resource": "File[/etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml]", "content": "--- /etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml.orig\n+++ /etc/opensearch/cloudelastic-omega-eqiad/opensearch.yml\n@@ -90,21 +90,23 @@\n transport.tcp.port: 9500\n #\n # --------------------------------- Discovery ----------------------------------\n+# See also # https://docs.opensearch.org/2.19/tuning-your-cluster#step-4-configure-discovery-hosts-and-initial-cluster-manager-nodes-for-a-cluster\n #\n # Pass an initial list of hosts to perform discovery when this node is started:\n # The default list of hosts is [\"127.0.0.1\", \"[::1]\"]\n #\n #discovery.seed_hosts: [\"host1\", \"host2\"]\n-#\n-# Bootstrap the cluster using an initial set of master-eligible nodes:\n-#\n-#cluster.initial_master_nodes: [\"node-1\", \"node-2\"]\n-#\n+discovery.seed_hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n+# Bootstrap the cluster using an initial set of cluster-manager-eligible nodes:\n+\n+#cluster.initial_cluster_manager_nodes: [\"node-1\", \"node-2\"]\n+cluster.initial_cluster_manager_nodes: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n+\n # Set to ensure a node sees N other master eligible nodes to be considered\n # operational within the cluster. Its recommended to set it to a higher value\n # than 1 when running more than 2 nodes in the cluster.\n #\n-discovery.zen.ping.unicast.hosts: [\"cloudelastic1009.eqiad.wmnet\", \"cloudelastic1010.eqiad.wmnet\", \"cloudelastic1011.eqiad.wmnet\"]\n #\n # For more information, consult the discovery and cluster formation module documentation.\n #"}], "perc_changed": "0.08%"}}}